BioSync Fingerprint Readers

KBF-1FP Fingerprint-Only	KBF-3KP Fingerprint + PIN	KBF-2PR/KBF-2SC Fingerprint + Smart Card

Introduction

Keri's BioSync Readers provide reliable fingerprint reading in attractive and unobtrusive packages. Readers are available in fingerprint-only, fingerprint + card and fingerprint + keypad versions. Typically used in higher security applications, they can be used either for primary user identification (fingerprint-only) or for secondary verification, based on initial use of a card or PIN.

Biosync Readers are compatible with Keri's PXL-500W Tiger Controller, NXT controllers with an NXT-WI Wiegand interface and 3rd party controllers that accept Wiegand-type readers. The readers contain an internal beeper and an LED bar to indicate fingerprint accepted and access granted/denied status for user feedback. Keypad and Card models may be used outdoors with appropriate covers. Fingerprint template sharing between readers is done using RS-485 networking, with an option for TCP/IP. Keri's BioManager software is used for enrollment and template management.

• High quality fingerprint readers in small, sleek and attractive packages
  
  
• Available in finger-only, finger + card or finger + PIN
  
  
• Card reader models available with Keri NXT + HID or Mifare/DESFire capabilities
  
  
• Stores up to 9500 fingerprint templates
  
  
• Multi-color LED bar to indicate access status
  
  
• Compatible with Keri's PXL-500W Tiger Controller and NXT Controllers
  
  
• Industry-standard Wiegand output for compatibility with most 3rd party hardware platforms
  
  
• Also available in a standalone access control unit for 99 users

Specifications

Material:
KBF-1FP and KBF-3KP - Molded Aluminum

KBF-2PR and KBF-2SC - ABS Plastic

Color:

Silver

Output:

Wiegand (8-128 bits, 26-bit default)
3'/1 meter cable supplied

Connection Method

TCP/IP to first unit, RS-485 to subsequent units (TCP/IP optional)

Programming

Via Keri BioManager Software

Capacity

9500 fingerprints (or 99 users for the standalone reader)

Sensor Type

Capacitive

1:1000 Read Time

970msec

Supported Card Technologies

• Keri NXT
• HID and EM 125KHz
• Mifare Classic/Plus/Ultralight
• DESFire
• EM or AWID available upon request

Power Requirements

9-14VDC @120mA

Indicators

Red, Green, Amber LED and Beeper

IP Rating

• KBF-1FO - IP54 (indoor only)
• All other units (outdoor use but require covers)

Operating Temperature:

• KBF-1FO - 32oF to 104oF/(0oC to + 40oC)
• Others - 5oF to 122oF/(-15oC to + 50oC)

Ordering Information

Part Number           Description

KBF-1FO                  Fingerprint-only Reader, indoor

KBF-2PR                  Fingerprint + Proximity Reader (Keri NXT + HID, 125 KHz)

KBF-2SC                  Fingerprint + Mifare Reader (Classic/Plus/Ultralight,DESFire)

KBF-3KP                   Fingerprint Reader + Keypad

KBF-CVR                  Cover for KMT-2 and KMT-3 Readers

KBF-SGP                  North American Single Gang Mounting Plate

KBF-2GP                   North American Double Gang Mounting Plate

KBF-TCP                   CNV-1000 RS-485 to TCP/IP Convertor

KBF-ENR                   Fingerprint Enrollment Station