Synchronize Clocks
The synchronization command sets the clock in all gateways and controllers to the time set in the system PC. This command requires a System Administrator password for execution. After authentication, the following actions occur:
- Application Server will send out a synchronization command with its PC clock (date/time) in UTC format to all connected Gateways.
- If the Gateway is not on the same PC as the Application Server, the Gateway service will set the PC clock to the UTC reference with local time zone adjustment.
- The Gateway service will then send the new date/time to each controller.
- From the Setup Menu, in the Hardware icon group, click the icon. The Synchronize Clocks window appears.
- Enter your System Administrator password and click the OK Button.
- Synchronization is automatically performed on the network, setting all Gateways and controllers to the system PC time.
Note: You can use the System Calendar licensed feature to automatically set up clock synchronizing for a weekly, daily time synching ensuring that the time stamp at the controller is always accurate.